Yashika Solutions

InsectPRO Dawn and dusk machine is a fully automated dawn and dusk machine or sunlight mimicking system that simulates day and night as a natural phenomenon. The unit is designed such a way that sun rise or sun set can be set at desired time. For example, we can set the unit to dawn from zero light to full light from 10 to 120 min or 2hrs and similar is the case with dusk time where in from full light to zero light can be set at the same interval. Since the simulator works on real time clock settings, in the event of power failure the system will still work on the settings. It does not require to reset or reenter the settings. Memory based RTC Real time clock has been set to make it function along with the unit. One single unit can take load up to 1000w bulbs so several insectary rooms can be controlled using a single unit. This unit can also be used where ever the natural day and night simulation is required.

Recently there are several reports are emerging stating the importance of maintaining healthy insect or animal colonies with artificial lighting control systems.

For temperature and humidity control unit available for insectary along with heating and humidifying units.

Recommendations

Can be used where mimicking of natural day-night lighting is required. It is found that the insects and animals grow better and stronger under the light mimicking system which helps animals feels natural lighting system under closed laboratory settings helps to maintain biological clock of animals.

Care Instructions

1. Never immerse the clock or the wiring of the clock in water. 2. Do NOT connect anything but a regular home lamp to the Sunrise System 150 (use light bulb up to 200W USA, up to 300W Europe) NOT for use with any other appliance! Maximum recommended load up to 1000 watts however the unit has been designed to take load up to 1500 watts 3. Do NOT attempt to replace the bulb in the lamp connected to the Sunrise System whilst the Setting Up and Using the Sunrise System power supply is connected or plugged in to either the lamp or the clock. 4. The Sunrise System will retain all settings if there is no power supply to the clock and a battery is fitted. 5. Use ONLY regular tungsten light/lamp bulbs in the lamp connected to the Sunrise System. 6. Don't use any other lightings like LEDs or any other light saving bulbs except regular tungston based candescent lightings

Additional Information:

• Item Code: LI-IR-519
• Production Capacity: 100
• Delivery Time: 10 Days
• Packaging Details: Carton Box Packing